Blocks contained in the Pedestrian Library are the building blocks you will use to construct your flowcharts. As usual, you have blocks that generate pedestrians, control pedestrian flow, process pedestrians.
|PedSource||Generates pedestrians. Is usually used as a starting point of the pedestrian flow.|
|PedSink||Disposes pedestrians. Is usually used as an end point of the pedestrian flow.|
|PedGoTo||Causes pedestrians to go to the specified target.|
|PedService||Simulates how pedestrians are serviced in services.|
|PedWait||Causes pedestrians to wait for a specified time in a specified location.|
|PedSelectOutput||Routes the incoming pedestrians to one of the five output ports depending on specified ratios or conditions.|
|PedEnter||Places pedestrians into the simulated environment.|
|PedExit||Removes pedestrians from the simulated environment.|
|PedEscalator||Simulates how pedestrians are transported by an escalator.|
|PedChangeGround||Moves pedestrians to a different ground.|
Defines rules and/or restrictions on pedestrian speed for the area. Allows to modify pedestrians speed and define maximum speed. Also allows making the area a “moving ground” and its speed and direction (use this feature to simulate escalators and moving lines)..
Organizes groups from sequence of pedestrians on input port.Also used to reassemble groups which have been split by blocks which don't support groups (like PedService): pedestrians wait in the given area and leave it in their original group when the whole group arrives.
|PedGroupChangeFormation||Causes group to change its form to a specified one when group leader passes this block.|
|PedGroupDisassemble||When group leader enters this block, group dissolves, so pedestrians become independent from each other and follow their personal paths.|
Allows specifying general parameters related to all blocks of the Pedestrian Library.